Descrizione immagine

Macchine e tecnologie per il settore alimentare

TPM ON PLATFORM

Descrizione immagine

  • Stainless steel bowl cylindrical;
  •  Stainless steel cover total opening with support springs of stainless steel, partial opening of the cover to inspect the inside of the vat during the processing phase;
  •  Heat exchanger plate high yield for a high heating rate and a minimum consumption of fuel.
  •  Electric control panel with control and ability to set thresholds of temperature and stop.
  •  Low-Voltage Switches.
  •  Group of solenoid valves for automatic management of heating and cooling manual;
  •  Drain valve in AISI 304 stainless steel sanitary.
  •  Anchoring system electrical panel on the wall to reduce the overall dimensions.
  •  System manual tilt piston facilitates the operator in the phase of discharge of the product and during the washing phase of the vat
  • variable speed stirrer

The MINI-DAIRY connected to a steam generator is suitable for heating, pasteurization and coagulation of the milk, as well as the extraction of the ricotta from whey and as preparer of hot water. When connected to a producer of cold water is great for storage of milk at 4 ° C. The plant consists of a stainless steel vatcylindrical with its cover total opening with support springs of stainless steel, but also with a partial opening to inspect, inside, during the processing phase. Provided with heat exchanger for greater efficiency and effectiveness for the step of heating and cooling, divided into three independent sections, according to the quantity of product to be processed, always through the control panel it handles all the work cycle such as temperature control, audible alarm, change speeds. The vat is placed on the frame in square tubular steel AISI 304 with leveling feet. Available in standard 200V TPM (vat 200 lt), TPM 300V ( vat 300 liter, TPM 600V (vat 600 lt) or at the request of the tank with a capacity of up to 2000 liters.

Descrizione immagine

OPTIONAL:

  • automated cutting of the curd
  • a pen chart recorder.
  • Automatic management of the solenoid valves for heating and cooling controlled by a PLC. 
  • Printer controlled by PLC.

 

TPM BASIC

Descrizione immagine

The MINI-DAIRY connected to a steam generator is suitable for heating, pasteurization and coagulation of the milk, as well as the extraction of the ricotta from whey and as preparer of hot water. When connected to a producer of cold water is great for storage of milk at 4 ° C. The plant consists of a stainless steel tub cylindrical with its cover total opening with support springs of stainless steel, but also with a partial opening to inspect, inside, during the processing phase. Provided with heat exchanger for greater efficiency and effectiveness for the step of heating and cooling, divided into three independent sections, according to the quantity of product to be processed, always through the control panel it handles all the work cycle such as temperature control, audible alarm, change speeds. The vat is placed on a frame in the raised square tubular steel AISI 304 with leveling feet, with platform and ladder. Available in standard 200V TPM (tank 200 lt), TPM 300V (300 liter tank), TPM 600V (tank 600 lt) or at the request of the tank with a capacity of up to 2000 liters.

 

  • Stainless steel bowl cylindrical;
  • Stainless steel cover total opening with support springs of stainless steel, partial opening of the cover to inspect the inside of the vat during the processing phase;
  • Heat exchanger plate high yield for a high heating rate and a minimum consumption of fuel.
  • Electric control panel with control and ability to set thresholds of temperature and stop.
  • Low-Voltage Switches.
  • Group of solenoid valves for automatic management of heating and cooling manual;
  • Drain valve in AISI 304 stainless steel sanitary.
  • Anchoring system electrical panel on the wall to reduce the overall dimensions.
  • System manual tilt piston facilitates the operator in the phase of discharge of the product and during the washing phase of the vat.

OPTIONAL:

  • automated cutting of the curd
  • a pen chart recorder.
  • Automatic management of the solenoid valves for heating and cooling controlled by a PLC. 
  • Printer controlled by PLC.
  • Structure with complete reversal of the vat